Accurate enough for the business owner
Easy enough for the homeowner
Important enough for the employee
G-Tape Inc. has come up with a new line of construction tools, which will do away with many unneeded or extra steps in measuring and marking. There is no more need for 2 people to measure and make marks on material. There is no need to waste time and manpower, marking and stretching out tape measures. There is no "human error" that will mess up a whole job.
G-Tape comes in different colors and applications. It has a printed pattern on a bright adhesive tape. The rolls are about 180 ft. long, so you will get a lot of use out of a roll. One highlight of the tape that seems to get a backseat to all of its other applications, is the "Work Safety" printed on all of our tapes. Every time someone looks at the tape, the first thing they will see and think of is safely, which makes a safer work environment.
We make G-Tape for many different trades from carpentry to roofing. When someone uses our tapes they will see a 20%-30% even all the up to a 75% increase in production. And the quality is perfect. If you are a professional or a new employee, an experienced DIYer or a homeowner tackling a big job, your finished product will look like a top of the line installation.
|
Important Tip! |
Its time to keep your tapes warm again. Tapes will freeze if left out in the cold. The tapes will come off in little pieces if they are frozen. Warm them up and they will work fine. Stay warm out there and be careful !!
Please call:
1-877-691-0600 to place an order. |
|
G-Tape
Standard is used with the standard exposure
shingles, it has a 5 inch
marking line for shingle exposure. The layout tape is 1 1/2 inches
wide and has approximately 180 foot of tape per roll. The
tape is neon green, for safety and has "Work
Safely" printed
on it for nonstop reminder of the dangers of roof work. 
How
to
use and ordering information >>
G-Tape
Metric is used with metric exposure shingles. It
has a 5 5/8 inch marking line for shingle exposure. The
tape is 1 1/2 inches wide and has approximately
180 foot of tape per roll. The tape is bright
yellow for safety and has "Work
Safely" printed
on it for nonstop reminder of the dangers of working on the roof. 
G-Tape
Truss tape is made to mark truss locations on the top
plate. Marked at 1 foot on center and you skip every
other mark to get a 2 foot on center truss location. The tape
is bright red for easy spotting and reading.
It's 3/4 inch wide and has approximately 180 foot on a roll. 
